|
Product Details:
Payment & Shipping Terms:
|
hydraulic piston-powered rock splitter is new type hole piston type hydraulic rock splitter, hydraulic soundless blasting, hand hold rock splitter improved, and alternative of Expansive Demolition Agent , first need to drill hole 90mm 105mm by DTH hammer drill, insert splitting rods with multi piston cylinder button press rock by super high pressure of 1,500 kgf/cm2 (150 MPA) which is not possible from other rock demolition power packs at several seconds to splitting big block from rock body.
Application :
hydraulic piston powered rock splitter. Applied for first cut for rock demolition, concrete breaking, and quarrying, building cracking like
road, bridge, foundation. Good for removing rocks out of foundation of buildings, trenching sites,
or small tunnel sites. The splitters are operated by a man worker. Each splitter weighs not more
than 30 kgs usually.Good for removing rocks out of foundation of buildings, trenching sites,or
small tunnel sites.Performs very well on hard rocks where wedge type rock splitters take long
hours to drill and split.
Product Features:
Light weight cylinders are operated by a man worker , while another worker is taking care of
the power pack. Good for small or narrow work sites. Short and light and good for demolition
work of small size or confined area work.
No leaking oil under high pressure of 1,600 kgf/cm2 nor breakage problem when used with
normal care. Manufactured for hand-held operator. Weight less 30 kgs easy
use.
1, Compare traditional blasting, Cylinder Rock Splitter working at non explosive and silent,
safe, no fly, higher efficiency, lower cost.
2, Compared with Hand held Hydra Splitter, Cylinder Rock Splitter only requires 800-1000mm in depth for over-size breaking capacity. Soft rocks are fractured with
hole spacing of 50-100 cm .Very efficient in rock demolition comparing with any
existing soundless rock breaking methods.
3, Cylinder Rock Splitter can break rock at very fast time, its job needs DHT hammer
rig drilling hole at first, and then can insert Splitter Rod Into pro hole, cracking time
at within 1 minute .
4, Compared with imported rock splitter, pump station use the imported spare part ,
its working pressure reach 150 MPA, flowing capacity high, up pressure fast, breaking
time short, performance stable, and price less.
Rocks splitter is operated by the super high pressure of 1,500 kgf/cm2 which is not
possible from other rock demolition power packs. Durable heavy duty equipment is
not compared with other rock splitters available today.
Technology Certification:
Power pack and splitting cylinders are protected by patents of utility model, new
design.Our splitters and power packs cannot be copied or imitated without our
permission. Easy repair in work site.
Cylinder rock Splitter Structure
Super high pressure hydraulic pump station, rod splitter, and rubber pipe 4 sets,
one steel box.
Hydraulic Pump:
A hydraulic pump ,maximum pressure 2,500 kgf/cm2,
low pressure 200 kgf/cm2.
operating pressure 1,500 kgf/cm2
Oil outflow: 0.32 liter/min at high pressure of 1,500 kgf/cm2
Oil outflow: 3 liter/min at low pressure of 200 kgf/cm2
Splitting Rod (Cylinder) :
A manual type splitting cylinder with 11 piston rods . A short(870mm) length and light(30kgs) cylinder with great performance is operated by hydraulic pump pressure
of 1,500 kgf/cm2.
Model No. CRD-90-11: A manual type rock splitter with 11 pistons on each
cylinder body of 90 mm diameter.
Model No. CRD-105-3: A splitting cylinder with 105 mm diameter body, 3 piston
rods in the cylinder.
No leak oil, no break after repeat use, No problem for 1500 hrs continuous use, very stronger.
Working capacity : 1 x 1 x 1 m .
